DESCRIPTION:

Electrode for cutting of all kinds of metals-alloyed & unalloyed steels, non-ferrous metals, cast iron & cast steels.  

APPLICATIONS: 

Metal Cutting, Piercing Holes

WELDING RECOMMENDATIONS:

A light reciprocating movement will help to drive the molten metal out of the kerf. The easiest way by horizontal pieces is to held on an angle of 45° in cutting direction. At vertical pieces an angle of 60°, downwards is recommend. Moistured electrodes should be re-dryed up to 70 °C for about 30 minutes.
...............................................
All Size Available. 5.00X450mm Ready Stock. [20kgs Per Box]

The best selling Stainless Steel electrode.

Low carbon Rutile-basic-coated austenitic stainless steel electrode with approx. 8% ferrite. Coating with very low moisture pick up. Soft fusion, without spatters, very easy slag removal, exceptional weld bead appearance, easy re-striking. Applied for all 18/8 type stainless steel at service temperatures from -120°C up to +350°C : tubes tanks, heat exchangers, piping systems.

Packaging :

1 Box of 10 Kgs contains 5 packets of 2kgs each.

For more information please check technical data sheet attached below.

Graphite basic coated electrode with a Ferro-Nickel alloy deposit for joining and repairing nodular cast iron. Deposit homogeneous and highly resistant against cracks. Particularly recommended for dissimilar welding of cast iron to steels and constructions of cast iron. Good bonding and flow of the weld metal. Defect in foundries, repairing of engine blocks, houses of tool machines, gearboxes, reducing parts, pump bodies, cast pieces, valve bodies. 

Packaging :

1 Box of 10 Kgs contains 5 packets of 2kgs each.

For more information please check technical data sheet attached below.

Key Features of Superon Stan Filler Wire : 

General Properties :

Melting range (Solidus – Liquidus): 710 - 793 °C

Minimum brazing temperature (flow point): 730 °C

Tensile Strength (filler metal): 56 kg/mm2 

Application :

Techbraze Copper Brazing rods find application in the refrigeration and air conditioning industries.They are used for joining copper to copper on vibration-free joints. This copper alloy is very effective for joining tight-fitting copper pipes and tubing.